CADian

Support

As evidenced by over 30 years of development history, trust-worthy Korean CAD, CADian!

Support
- Products
- Download
- Support
- Partner Center
- About
Community
- Community
- Technical Support
Notices

Notices · 2008.03.22 * What's new from Omega 47 of CADian2008 ?
* What's new from Omega 47 of CADian2008 ? 1 1753 A phenomenon which blinking when execute rt zoom, rt pan (Needs more and more yet) 2 1815 A problem that cannot be saved when CADian is being shutdown after showed "Will you save the change?" 3 1867 Trim error of pline 4 1869 Trim error of pline 5 1891 A drawing which make CADian shutdown when holding tangent snap 6 1892 Plot error 7 1896 undo error 8 1902 Pline : Vertex is not displayed & changed for the pline entity 9 1903 dimaligned error 10 1908 Dimaligned : An item which is not exist at the properities bar 11 1909 CADian is shutdown when select a hatching area 12 1910 A problem that CADian is ended if click the close button when users feel CADian is shutdown 13 1913 When select multiple entities to stretch, the entity which was selected previously was moved too much 14 1914 When stretch an entity with includes another entity, CADian is shutdown 15 1916 CADian is shutdown when insert a specific block with DDINSERT 16 1917 CADian prompt history window is disappeared 17 1919 Command prompt is never showed up after execution of zoom pan command 18 1920 This error happened when change the folder name after create a folder newly at open/save window 19 1922 Ghost image happened severely when executing stretch for text 20 1923 A specific drawing which make an error when paste excel data to the drawing area 21 1927 A hatch entity which was copied cannot be executed as associative hatch 22 1928 An entity which is hatched with line, it cannot be executed as associative hatch 23 1935 Attribute date which was written at MECH is not shown at properties bar 24 1936 An error when execute ddatte command at attribute date which was written at MECH 25 1939 A problem that attribute cannot be inserted 26 1940 block units : If save a block at block edit window, the units is changed 27 1941 A problem that the block units should be set continuously 28 1944 Error of the Propertites bar 29 1842 An error when input dimension with osnap as on 30 1874 Stretch cannot be done with holding OSNAP to the direction of mouse pointer 31 1906 When move to veritical & horizontal direction with holding grip point, the moving is not shown 32 oooo lisp issue * What's new from Omega 46 of CADian2008 ? 1 1588 pline : chamfer error 2 1589 Pline : Execute fillet after chamfer, or chamfer after fillet, both made an error 3 1646 A problem when the propertites bar is off, if change dtext character and then the chatacter disappeared 4 1832 CADian is still hang when select the curved area for hatch 5 1884 Cross hair of ghost image and speed of entity snap 6 1905 The layer of the drawing which was applied xref is not shown at CADian Explorer 7 1842 An error when input dimension with osnap as on 8 1871 This is an error when fillet pline which includes round 9 1873 Dim line is shrinked so severely when execute qdim 10 1874 Stretch cannot be done with holding OSNAP to the direction of mouse pointer 11 1875 text stretch : The entity which was selected secondly & selected with drag twice, the secondly selected text cannot be stretched 12 1878 At Open Drawing window, please change the setting whole name of the drawing can be selected 13 1879 Fillet error of pline 14 1890 When autosave a drawing, it takes so much time. So it seems like shutdown 15 1894 Regen is applied only the part which is shown on the screen 16 1895 There are some difference both KOR and ENG version of the file formats for appload 17 1899 An extra line is created more while executing fillet for pline 18 1900 Snap is not working when the entity size is maximized 19 1904 X-Ref layer freez, off not working 20 1908 Dimaligned : An item which is not exist at the eproperities bar 21 1876 z Value error 22 1880 A holding symptom happened when moving the mouse * What's new from Omega 44 & 45 of CADian2008 ? 1 1588 pline : chamfer error 2 1646 A problem when the propertites bar is off, if change dtext character and then the chatacter disappeared. 3 1871 This is an error when fillet pline which includes round 4 1873 Dim line is shrinked so severely when execute qdim. 5 1877 Add the function when select or release an entity using shift key. 6 1879 Fillet error of pline 7 1880 A holding symptom happened when moving the mouse 8 1881 Can't save the dwg file. 9 1883 A dimension error when execute copy, move, stretch for Dimalign. 10 1884 Cross hair of ghost image and speed of entity snap 11 1885 Fillet error of pline 12 1886 Fillet is not working according to the selection order. 13 1887 Fillet error of polyline. 14 1888 Fillet error of pline. 15 1889 Entity selection is not well working at the Properties window. 16 1890 When autosave a drawing, it takes so much time. So it seems like shutdown. 17 OOOO Fixed samsung DVM-pro issue * What's new from Omega 43 of CADian2008 ? 1 1352 attribute date : propertites bar 2 1633 Problem When select true type font character, it is not changed to dotted line 3 1813 Cross hair of ghost image happened when change from Layout tab to Model tab 4 1859 hatch entity : move> undo error 5 1861 hatch entites : rotate error 6 1863 A drawing which make the CADian shutdown when pasteclip to a new drawing 7 1864 A problem that some entities cannot be copied when copy several entities between drawings 8 1868 pline fillet error 9 1872 Toolbars cannot be activated at the beginning of execution of CADian * What's new from Omega 42 of CADian2008 ? 1849 An entity cannot be selected even though it is seen 1755 A problem that CADian is hang if refclose after modified some entity at refedit mode 1862 An error of dwg tab which happened after open a long length drawing file name 1848 It takes so much time to convert the fonts when input some parts of CADMECH 1860 Hatch entites which cannot be stretched 1711 A problem that CADian asks 'will you save the changes?', in spite of select 'Not save & Close All' at the dwg tab 1833 getfiled function for Lisp developer * What's new from Omega 41 of CADian2008 ? 1. 1866 If execute cloudp, propertites bar is shrinking severely 2. 1870 If execute undo & stretch for a block, the Block is disappeared * What's new from Omega 40 of CADian2008 ? 1. 1851 Trim error with hatch 2. 1856 a function to manage an Image command with SDS 3. 1858 Lisp functions 4. 1868 pline fillet error 5. 1824 issue to stretch the DIM 6.. oooo Impossible to select the locked layers with UCS command entity * What's new from Omega 39 of CADian2008 ? 1 oooo Qdim 2 1850 Uni-Code input error 3 1851 Trim error with hatch 4 1856 a function to manage an Image command with SDS (Just for Samsung Electronics) 5 1857 The size of Window for CADian cannot be adjusted when execute the CADian first time after initialization 6 1860 Hatch entites which cannot be stretched * What's new from Omega 38 of CADian2008 ? 1 1764 Change of 'Block unit' in [Block Definition] window. To mm unit. 2 1818 The values of Propertites bar is changed continuously when Zoom In/Out 3 1833 getfiled function (Only to application developer) 4 1835 trim > undo error 5 1836 trim > extend error 6 1852 Trim & extend cannot be done when the Z values are different with each other 7 1853 Trim &, extend for the entity(which has Z value) cannot be done. It depends on to execute zoom in/out or not to execute zoom in/out 8 1854 If execute trim with selection all , it doesn't work at all 9 1855 Hatch DCL size error happened after hatch or set hatch area 10 1749 A problem that 'z' value for the new line is set * What's new from Omega 37 of CADian2008 ? 1 1748 Done : Change the background color of preview (at Open Drawing window) from white to black 2 1633 Done : When select true type font character, it is not changed to dotted line 3 1665 Done : A problem Properties Bar Off > Select Entity > Properties Bar On , and then shutdown 4 1746 Done : error from hatch dcl 5 1747 Done : Draw Order error at the hatch DCL 6 1749 Done : A problem that 'z' value for the new line is set 7 1761 Done : A error which happened, while moving scroll bar at property window without select any entity 8 1764 Done : Change 'Block unit' to mm in [Block Definition] window 9 1806 Done : speed up for rt-z and rt-p 10 1815 Done : A problem that cannot be saved when CADian is being shutdown after showed "Will you save the change?" 11 1833 Done : getfiled function 12 1843 Done : zoom error * What's new from Omega 36 of CADian2008 ? 1 dimension vertical problem 2 an error at continous DIM with dimaligned 3 Improved the filter command 4 CADian is shutdown when execute regen after zoom to the end 5 Cross hair of ghost image happened when change from Layout tab to Model tab 6 Cross hair of ghost image happened when change from Layout tab to Model tab 7 CADian is shutdown when insert symbol at CADMAS(=CADMECH). 8 CADian is shutdown if open propertites bar after select entities 9 An error when input dimension with osnap as on 10 Change of 'Block unit' in [Block Definition] window * What's new from Omega 35 of CADian2008 ? 1 CADian Explorer : Change the settings of Layer as AutoCAD's 2 Improved the filter command 3 A problem that if draw a line with polar and ortho are on, but it is not displayed 4 An entity which is hyperlinked at AutoCAD, but the entity cannot be opened at CADan 5 CADian is shutdown when execute join command for lines at ARCH 6 A problem that cannot be saved when CADian is being shutdown after showed "Will you save the change?" 7 Selection speed (for trim, extend and etc) is so slow at the drawing which has many entities 8 An entity which location is changed when preview for print. 9 When input the distance with mouse at rectangular array, the direction for minus(-) value cannot be set. 10 At polar array, minus(-) value for the angle cannot be set 11 Angle cannot be entered with mouse at Polar Array 12 Cross hair of Ghost image happened after change the properties of Layer at CADian Explorer. 13 CADian is shutdown when change an entity to frozen Layer 14 Cannot change some entity to frozen layer 15 There is no 'Freeze' option at CADian explorer 16 There is no 'Freeze' option at CADian explorer 17 Entity shape is changed when execute polar array for spline or ellipse entity with the center point base 18 Number of decimal point for Center Point cannot be controlled at polar array. 19 The color of Layer is changed to red when turn off the Layer. 20 Some very small entities are not shown on the screen when do Zoom out. 21 1Entities are not seen after [Zoom all]. 22 Read error of 3D data If you need to get the latest of patch file, please let us know your serial No, Company name, your name and e-mail. You can send your information to help@cadian.com Regards, CADian Helpdesk

Notices · 2008.03.22

* What's new from Omega 47 of CADian2008 ?

* What's new from Omega 47 of CADian2008 ? 1 1753 A phenomenon which blinking when execute rt zoom, rt pan (Needs more and more yet) 2 1815 A problem that cannot be saved when CADian is being shutdown after showed "Will you save the change?" 3 1867 Trim error of pline 4 1869 Trim error of pline 5 1891 A drawing which make CADian shutdown when holding tangent snap 6 1892 Plot error 7 1896 undo error 8 1902 Pline : Vertex is not displayed & changed for the pline entity 9 1903 dimaligned error 10 1908 Dimaligned : An item which is not exist at the properities bar 11 1909 CADian is shutdown when select a hatching area 12 1910 A problem that CADian is ended if click the close button when users feel CADian is shutdown 13 1913 When select multiple entities to stretch, the entity which was selected previously was moved too much 14 1914 When stretch an entity with includes another entity, CADian is shutdown 15 1916 CADian is shutdown when insert a specific block with DDINSERT 16 1917 CADian prompt history window is disappeared 17 1919 Command prompt is never showed up after execution of zoom pan command 18 1920 This error happened when change the folder name after create a folder newly at open/save window 19 1922 Ghost image happened severely when executing stretch for text 20 1923 A specific drawing which make an error when paste excel data to the drawing area 21 1927 A hatch entity which was copied cannot be executed as associative hatch 22 1928 An entity which is hatched with line, it cannot be executed as associative hatch 23 1935 Attribute date which was written at MECH is not shown at properties bar 24 1936 An error when execute ddatte command at attribute date which was written at MECH 25 1939 A problem that attribute cannot be inserted 26 1940 block units : If save a block at block edit window, the units is changed 27 1941 A problem that the block units should be set continuously 28 1944 Error of the Propertites bar 29 1842 An error when input dimension with osnap as on 30 1874 Stretch cannot be done with holding OSNAP to the direction of mouse pointer 31 1906 When move to veritical & horizontal direction with holding grip point, the moving is not shown 32 oooo lisp issue * What's new from Omega 46 of CADian2008 ? 1 1588 pline : chamfer error 2 1589 Pline : Execute fillet after chamfer, or chamfer after fillet, both made an error 3 1646 A problem when the propertites bar is off, if change dtext character and then the chatacter disappeared 4 1832 CADian is still hang when select the curved area for hatch 5 1884 Cross hair of ghost image and speed of entity snap 6 1905 The layer of the drawing which was applied xref is not shown at CADian Explorer 7 1842 An error when input dimension with osnap as on 8 1871 This is an error when fillet pline which includes round 9 1873 Dim line is shrinked so severely when execute qdim 10 1874 Stretch cannot be done with holding OSNAP to the direction of mouse pointer 11 1875 text stretch : The entity which was selected secondly & selected with drag twice, the secondly selected text cannot be stretched 12 1878 At Open Drawing window, please change the setting whole name of the drawing can be selected 13 1879 Fillet error of pline 14 1890 When autosave a drawing, it takes so much time. So it seems like shutdown 15 1894 Regen is applied only the part which is shown on the screen 16 1895 There are some difference both KOR and ENG version of the file formats for appload 17 1899 An extra line is created more while executing fillet for pline 18 1900 Snap is not working when the entity size is maximized 19 1904 X-Ref layer freez, off not working 20 1908 Dimaligned : An item which is not exist at the eproperities bar 21 1876 z Value error 22 1880 A holding symptom happened when moving the mouse * What's new from Omega 44 & 45 of CADian2008 ? 1 1588 pline : chamfer error 2 1646 A problem when the propertites bar is off, if change dtext character and then the chatacter disappeared. 3 1871 This is an error when fillet pline which includes round 4 1873 Dim line is shrinked so severely when execute qdim. 5 1877 Add the function when select or release an entity using shift key. 6 1879 Fillet error of pline 7 1880 A holding symptom happened when moving the mouse 8 1881 Can't save the dwg file. 9 1883 A dimension error when execute copy, move, stretch for Dimalign. 10 1884 Cross hair of ghost image and speed of entity snap 11 1885 Fillet error of pline 12 1886 Fillet is not working according to the selection order. 13 1887 Fillet error of polyline. 14 1888 Fillet error of pline. 15 1889 Entity selection is not well working at the Properties window. 16 1890 When autosave a drawing, it takes so much time. So it seems like shutdown. 17 OOOO Fixed samsung DVM-pro issue * What's new from Omega 43 of CADian2008 ? 1 1352 attribute date : propertites bar 2 1633 Problem When select true type font character, it is not changed to dotted line 3 1813 Cross hair of ghost image happened when change from Layout tab to Model tab 4 1859 hatch entity : move> undo error 5 1861 hatch entites : rotate error 6 1863 A drawing which make the CADian shutdown when pasteclip to a new drawing 7 1864 A problem that some entities cannot be copied when copy several entities between drawings 8 1868 pline fillet error 9 1872 Toolbars cannot be activated at the beginning of execution of CADian * What's new from Omega 42 of CADian2008 ? 1849 An entity cannot be selected even though it is seen 1755 A problem that CADian is hang if refclose after modified some entity at refedit mode 1862 An error of dwg tab which happened after open a long length drawing file name 1848 It takes so much time to convert the fonts when input some parts of CADMECH 1860 Hatch entites which cannot be stretched 1711 A problem that CADian asks 'will you save the changes?', in spite of select 'Not save & Close All' at the dwg tab 1833 getfiled function for Lisp developer * What's new from Omega 41 of CADian2008 ? 1. 1866 If execute cloudp, propertites bar is shrinking severely 2. 1870 If execute undo & stretch for a block, the Block is disappeared * What's new from Omega 40 of CADian2008 ? 1. 1851 Trim error with hatch 2. 1856 a function to manage an Image command with SDS 3. 1858 Lisp functions 4. 1868 pline fillet error 5. 1824 issue to stretch the DIM 6.. oooo Impossible to select the locked layers with UCS command entity * What's new from Omega 39 of CADian2008 ? 1 oooo Qdim 2 1850 Uni-Code input error 3 1851 Trim error with hatch 4 1856 a function to manage an Image command with SDS (Just for Samsung Electronics) 5 1857 The size of Window for CADian cannot be adjusted when execute the CADian first time after initialization 6 1860 Hatch entites which cannot be stretched * What's new from Omega 38 of CADian2008 ? 1 1764 Change of 'Block unit' in [Block Definition] window. To mm unit. 2 1818 The values of Propertites bar is changed continuously when Zoom In/Out 3 1833 getfiled function (Only to application developer) 4 1835 trim > undo error 5 1836 trim > extend error 6 1852 Trim & extend cannot be done when the Z values are different with each other 7 1853 Trim &, extend for the entity(which has Z value) cannot be done. It depends on to execute zoom in/out or not to execute zoom in/out 8 1854 If execute trim with selection all , it doesn't work at all 9 1855 Hatch DCL size error happened after hatch or set hatch area 10 1749 A problem that 'z' value for the new line is set * What's new from Omega 37 of CADian2008 ? 1 1748 Done : Change the background color of preview (at Open Drawing window) from white to black 2 1633 Done : When select true type font character, it is not changed to dotted line 3 1665 Done : A problem Properties Bar Off > Select Entity > Properties Bar On , and then shutdown 4 1746 Done : error from hatch dcl 5 1747 Done : Draw Order error at the hatch DCL 6 1749 Done : A problem that 'z' value for the new line is set 7 1761 Done : A error which happened, while moving scroll bar at property window without select any entity 8 1764 Done : Change 'Block unit' to mm in [Block Definition] window 9 1806 Done : speed up for rt-z and rt-p 10 1815 Done : A problem that cannot be saved when CADian is being shutdown after showed "Will you save the change?" 11 1833 Done : getfiled function 12 1843 Done : zoom error * What's new from Omega 36 of CADian2008 ? 1 dimension vertical problem 2 an error at continous DIM with dimaligned 3 Improved the filter command 4 CADian is shutdown when execute regen after zoom to the end 5 Cross hair of ghost image happened when change from Layout tab to Model tab 6 Cross hair of ghost image happened when change from Layout tab to Model tab 7 CADian is shutdown when insert symbol at CADMAS(=CADMECH). 8 CADian is shutdown if open propertites bar after select entities 9 An error when input dimension with osnap as on 10 Change of 'Block unit' in [Block Definition] window * What's new from Omega 35 of CADian2008 ? 1 CADian Explorer : Change the settings of Layer as AutoCAD's 2 Improved the filter command 3 A problem that if draw a line with polar and ortho are on, but it is not displayed 4 An entity which is hyperlinked at AutoCAD, but the entity cannot be opened at CADan 5 CADian is shutdown when execute join command for lines at ARCH 6 A problem that cannot be saved when CADian is being shutdown after showed "Will you save the change?" 7 Selection speed (for trim, extend and etc) is so slow at the drawing which has many entities 8 An entity which location is changed when preview for print. 9 When input the distance with mouse at rectangular array, the direction for minus(-) value cannot be set. 10 At polar array, minus(-) value for the angle cannot be set 11 Angle cannot be entered with mouse at Polar Array 12 Cross hair of Ghost image happened after change the properties of Layer at CADian Explorer. 13 CADian is shutdown when change an entity to frozen Layer 14 Cannot change some entity to frozen layer 15 There is no 'Freeze' option at CADian explorer 16 There is no 'Freeze' option at CADian explorer 17 Entity shape is changed when execute polar array for spline or ellipse entity with the center point base 18 Number of decimal point for Center Point cannot be controlled at polar array. 19 The color of Layer is changed to red when turn off the Layer. 20 Some very small entities are not shown on the screen when do Zoom out. 21 1Entities are not seen after [Zoom all]. 22 Read error of 3D data If you need to get the latest of patch file, please let us know your serial No, Company name, your name and e-mail. You can send your information to help@cadian.com Regards, CADian Helpdesk

WED. APR. 09 is temporary Holiday for Election in Korea .

If you are CADian 2008 user, update to the new patch (Omega 47)

Return to List

Business Name : CADian Inc.
Address : 1009, 115, Gasan digital 2-ro, Geumcheon-gu, Seoul, Republic of Korea (08505)
CEO : Seung Hoon Park Business Registration Number : 105-81-74484
Sales : partner@cadian.com
Support : help@cadian.com
Fax : +82 2-2107-3286

CADian

Products

Download

Support

Partner Center

About

Support